Lightly Used Products
Lightly Used Products
From training models to trade show equipment, The Hose Monster Company has an inventory of lightly used parts that are just as safe, effective, and accurate as any product that comes straight off the assembly line. Each used part is inspected and guaranteed by Hose Monster experts, so you can give your constituents the peace of mind they deserve.
Why Buy Used Products?
Lower Cost
When you buy lightly used parts from us, you are getting the same elite products without the elite price.
Warranty
All the products we sell on this page have been inspected for quality assurance and carry the same warranty as brand-new Hose Monster™ products.
Inventory
Here is what we currently have in stock. If you don’t see what you’re looking for, don’t worry—our inventory is constantly being updated is and subject to change.
Save $86.00
2 1/2" Gauge Cap, NH
$86.00
$172
Units Available: 1
Item#: GCSW
- W/O FITTING
Save $1,025.00
4" Hydrant Gate Valve, NH thread
$1050
$2075
Units Available: 1
Item#: HGV4NST
- Avoid water hammer and simplify hydrant capacity flow tests.
- Lightweight aluminum design.
- Compact design with spinning knob.
- Connect directly to the hydrant and then to a hose.
- Pressure rating for 250 psi.
Save $423.00
2½" Hydrant Gate Valve, NYFD thread
$335
$758
Units Available: 1
Item#: HGV25NYFD
- Avoid water hammer and simplify hydrant capacity flow tests.
- Lightweight aluminum design.
- Compact design with spinning knob.
- Connect directly to the hydrant and then to a hose.
- Pressure rating for 250 psi.
Save $379.00
1 1/8″ Pitotless Nozzle® Grooved
$379
$758
Units Available: 4
Item#: PN1.125GRV
- Use the Pitotless Nozzle® to measure the water flow-rate while conducting fire pump tests or fire flow tests on hydrants.
- The operating range with the Little Hose Monster is 48 to 243 GPM.
- The operating range to Open Atmosphere is 48 to 248 GPM.
- The Pitotless Nozzle Grooved is designed for use with The Little Hose Monster or discharging into open atmosphere.
- FM Approved.
Save $379.00
1¾“ Pitotless Nozzle®, Grooved
$379.00
$758.00
Units Available: 1
Item#: PN1.75GRV
- Use the Pitotless Nozzle® to measure the water flow rate while conducting fire pump tests or hydrant flow tests.
- The operating range with the Little Hose Monster™ is 331 to 936 GPM.
- The operating range to open atmosphere is 347 to 981 GPM.
- The Pitotless Nozzle®, Grooved is designed for use with the Little Hose Monster™ or discharging into open atmosphere.
- FM Approved.
Save $379.00
2“ Pitotless Nozzle®, Grooved
$379.00
$758.00
Units Available: 2
Item#: PN2GRV
- Use the Pitotless Nozzle® to measure the water flow-rate while conducting fire pump tests or fire flow tests on hydrants.
- The operating range with the Little Hose Monster™ is 493 to 1,305 GPM.
- The operating range to Open Atmosphere is 529 to 1,399 GPM.
- The Pitotless Nozzle® Grooved is designed for use with the Little Hose Monster™ or discharging into open atmosphere.
- FM Approved.
Save $419.00
Little Hose Monster™
$419.00
$838
Units Available: 2
Item#: HML
- The Little Hose Monster™ is used for fire pump testing, rooftop standpipe testing, hydrant flow testing and flushing.
- Small and lightweight – yet it neutralizes the tremendous force of discharge water.
- The Little Hose Monster™ has no pitot so small rocks and debris pass right through the system without causing damage.